Material: 304 Stainless Steel
What does MotorTrend have to say about the Prius Cat Shield?
"After six months and about 8,000 miles of driving, we haven’t noticed any difference in performance. No change in quietness, no rattles, no discernable shift in acceleration or heat. Our catalytic converter, most important, is still attached to our car after about 13,000 miles. If anything changes during our time with the car, we’ll let you know."
Notes: Shield may have some surface imperfections. Professional installation recommended. Package includes catalytic converter shield, tamper-proof hardware kit, Cat Shield Protected sticker, and detailed installation guide. Order today to protect your vehicle from catalytic converter theft.
Our Fitment Guarantee: While we do our best to test and verify every model, it is impossible to know for sure. We guarantee that if your vehicle is listed on the fitment table and you purchased the right shield for your vehicle but the shield does not fit, we will issue a full refund including return shipping on the product. The vehicle must have the original converter and no modifications to the suspension. If you are unsure about your fitment, please send photos to support@millercat.com to verify fitment before purchase.
Year | Make | Model | Engine Size | Drivetrain | Notes |
---|---|---|---|---|---|
2023 | Toyota | Prius | 2.0L | FWD/AWD | Includes Prius Prime |
2024 | Toyota | Prius | 2.0L | FWD/AWD | Includes Prius Prime |
Disclaimer: Our product was designed to be used under normal operating conditions set by the manufacturer. Exceeding those conditions may risk damage to the vehicle or the product. See Section 28 in our Terms of Service for more information.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit P65Warnings.ca.gov.
Will the shield interfere with maintenance such as engine oil and transmission fluid changes?
All Miller CAT Cat Shields will not interfere with your oil changes. Some vehicles will require the shield to be removed for transmission fluid changes. Check your maintenance schedule on how frequently to change your transmission fluid. Toyota's recommendation is 30-60k miles and 60-100k miles depending on your vehicle and driving habits.
Does this shield cause the converter to overheat?
No, our shields will not cause overheating or damage to your vehicle. In addition to shields, we manufacture catalytic converters, so we know how to protect them without damaging the converter or your vehicle. Read about this in more detail.
How long does it take to ship?
We know you can’t wait long to protect your converters when theft is so rampant. Here at Miller CAT, our shields are made to stock and ready to ship. Unlike many other companies that make shields to order, we fulfill orders in 1-2 business days and if possible, on the same day.
Free Shipping Info
Free shipping is available to the lower 48 States. Please note that we cannot deliver to P.O. Boxes. Orders will take 1-2 business days to fulfill.
Expedited Shipping Info
Expedited shipping is available for customers who need their products sooner. Please note the following when choosing an expedited shipping method:
International Purchases
Miller CAT will collect the estimated duties and taxes and pay it on behalf of the customer. The final price you see should be the final price you pay.
Returns
We have a 30-day return policy window for unused products. Please visit this
link for more information.
Note: We ask that you carefully review vehicle compatibility and other product/install information before making your purchase. Help us reduce the possibility of returns as much as possible and reduce the carbon footprint of these shields, as they are large and expensive to ship.
We have a 90-day manufacturer's warranty against defects from the manufacturing process. This covers issues that prevent the proper installation or performance of the product.
Cosmetic imperfections that occur either from the manufacturing or shipping process are not covered. We do not manufacture cosmetic products or ones designed for show. Any undercar product will quickly gain scratches and scuffs due to the location of the product and proximity to the road. Click here to find out more about the manufacturing process and what you might expect from your product.
We do NOT guarantee our product against theft. Cat Shields are a deterrence device that are meant to discourage theft and/or make it more difficult for thieves to steal your converter. Given the right tools, technique or time, a thief can still take your converter. However, by having a shield, you are significantly increasing your protection against converter theft. Similar to a car or home alarm, you are making thieves second-guess themselves and consider moving onto another target. Deterrence works and we have countless customer accounts and video evidence of derailed converter theft.
I don’t know what you want me to say but to describe it. It looked solidly built, recommended by a Toyota mechanic so it must be good. Your company though sent me the wrong size bolt. The mix up was handled professionally, communication was great and the right bolts are supposedly on the way. No CC is safe and I know that for a fact but looking at your Cat Shield, they are going to work for it to steal my CC. Thanks
Clear instructions, easy to install. The sheet metal is thin but hopefully enough to discourage potential thieves.
This stainless steel Miller Cat Shield fit perfectly on my Toyota Prius Prime 2024. Instructions were very clear, and easy. I figured with a proper car lift, it shouldn't take more than 30 minutes, so I went to my regular garage.
My mechanic (whom has experience installing other brand of catalytic converter shield on different vehicules) even told me he was impressed with the quality, fit, and ease of installation of this Miller Cat Shield on this car. No drilling required at all. Took him a bit less than 30 minutes to do the installation.No issue so far (1 week since installation).
Note: Packaging did not have adequat padding for such a thin hard metal item. (Box probably too small to add more/better padding) and the shield tabs had sliced through the box edges in some places. But luckily there was no damage to the shield! So in the end all good. Super happy with purchase!
I chose the aluminum thinking that the goal is to discourage any catalytic converter thief.
I hope my rational is sound.
Delivery was quick and install was affordable at the dealership. Looks factory underneath the car.
I don’t know what you want me to say but to describe it. It looked solidly built, recommended by a Toyota mechanic so it must be good. Your company though sent me the wrong size bolt. The mix up was handled professionally, communication was great and the right bolts are supposedly on the way. No CC is safe and I know that for a fact but looking at your Cat Shield, they are going to work for it to steal my CC. Thanks
Clear instructions, easy to install. The sheet metal is thin but hopefully enough to discourage potential thieves.
This stainless steel Miller Cat Shield fit perfectly on my Toyota Prius Prime 2024. Instructions were very clear, and easy. I figured with a proper car lift, it shouldn't take more than 30 minutes, so I went to my regular garage.
My mechanic (whom has experience installing other brand of catalytic converter shield on different vehicules) even told me he was impressed with the quality, fit, and ease of installation of this Miller Cat Shield on this car. No drilling required at all. Took him a bit less than 30 minutes to do the installation.No issue so far (1 week since installation).
Note: Packaging did not have adequat padding for such a thin hard metal item. (Box probably too small to add more/better padding) and the shield tabs had sliced through the box edges in some places. But luckily there was no damage to the shield! So in the end all good. Super happy with purchase!
I chose the aluminum thinking that the goal is to discourage any catalytic converter thief.
I hope my rational is sound.
Delivery was quick and install was affordable at the dealership. Looks factory underneath the car.
I don’t know what you want me to say but to describe it. It looked solidly built, recommended by a Toyota mechanic so it must be good. Your company though sent me the wrong size bolt. The mix up was handled professionally, communication was great and the right bolts are supposedly on the way. No CC is safe and I know that for a fact but looking at your Cat Shield, they are going to work for it to steal my CC. Thanks
Clear instructions, easy to install. The sheet metal is thin but hopefully enough to discourage potential thieves.
This stainless steel Miller Cat Shield fit perfectly on my Toyota Prius Prime 2024. Instructions were very clear, and easy. I figured with a proper car lift, it shouldn't take more than 30 minutes, so I went to my regular garage.
My mechanic (whom has experience installing other brand of catalytic converter shield on different vehicules) even told me he was impressed with the quality, fit, and ease of installation of this Miller Cat Shield on this car. No drilling required at all. Took him a bit less than 30 minutes to do the installation.No issue so far (1 week since installation).
Note: Packaging did not have adequat padding for such a thin hard metal item. (Box probably too small to add more/better padding) and the shield tabs had sliced through the box edges in some places. But luckily there was no damage to the shield! So in the end all good. Super happy with purchase!
I chose the aluminum thinking that the goal is to discourage any catalytic converter thief.
I hope my rational is sound.
Delivery was quick and install was affordable at the dealership. Looks factory underneath the car.
Thanks for subscribing!
This email has been registered!