Miller CAT Toyota Tacoma 3.5L Gen 3 Cat Shield
Miller CAT Toyota Tacoma 3.5L Gen 3 Cat Shield
Miller CAT Toyota Tacoma 3.5L Gen 3 Cat Shield
Miller CAT Toyota Tacoma 3.5L Gen 3 Cat Shield
Miller CAT Toyota Tacoma 3.5L Gen 3 Cat Shield
Miller CAT Toyota Tacoma 3.5L Gen 3 Cat Shield
Miller CAT Toyota Tacoma 3.5L Gen 3 Cat Shield
Miller CAT Toyota Tacoma 3.5L Gen 3 Cat Shield
Miller CAT Toyota Tacoma 3.5L Gen 3 Cat Shield

Toyota Tacoma 3.5L 2016-2023 Cat Shield

Protect your Gen 3 Toyota Tacoma RWD, 3.5L with Cat Shield™, available for OEM converters. Please review specs and compatibility information below prior to purchase.
SKU: TOY-043
$290.00
$290.00
$290.00

Heavy Duty Version Available for 4WD

Due to popular demand, we now have an HD version of the 4WD model available, now with thicker 12 gauge 304 stainless steel!

Material: Aluminum
Drivetrain: RWD
Subtotal: $290.00
Toyota Tacoma 3.5L 2016-2023 Cat Shield

Toyota Tacoma 3.5L 2016-2023 Cat Shield

$290.00 $290.00

Toyota Tacoma 3.5L 2016-2023 Cat Shield

$290.00 $290.00
Material: Aluminum
Drivetrain: RWD

Customer Reviews

Based on 555 reviews
88%
(489)
12%
(65)
0%
(0)
0%
(0)
0%
(1)
E
Earle Davis
Seems solid , ez to install

After watching a YouTube video was very easy to install my cat shield. Hopefully it will keep my converters safe from thieves.

M
Miles Hayes
Had to use a red sharpie to make it look like I busted my knuckles.

I purchased the aluminum version for my 2017 Tacoma 2-wheel drive.
Installation was pretty easy and took me about two hours, working by myself in my garage. The unit came with security bolts, two security bits, a tube of thread lock, and a small installation booklet. The only thing I had to remove beforehand was a couple of diagonal braces, which was indicated in the installation booklet. The braces then go back into place when mounting the cover. All the included security screws and brackets fit as designed, and drilling additional holes was not necessary. The mounting instructions are pretty simple, only three pages, and also provide torque specs. (Be careful not to over-tighten.) I raised up my truck using ramps and jack stands, and I used a 5-gallon bucket to set the cover on while I lined up the holes. It all worked and fit well and is a pretty good design. No cramming or jamming was needed. The unit isn't foolproof, but hopefully provides enough of a deterrent that a cat thief moves on. Money well spent for me and priced reasonably. And no bloody knuckles, thanks MillerCat. :-)

T
Tacoma Fan
3rd gen Tacoma millercat shield

Came promptly and properly packaged in excellent condition! Assembly and install about an hour with no problems. Used a floor jack to position (12ga model) Looks great and a great theft deterrent! Highly recommend it!

R
Robert B
Tacoma TRD Sport

Excellent delivery. Perfect fit. It took the local muffler shop less than 30 minutes to install.

s
sal valente
safe cats

The usual slight struggle to get installed. Driver side of the shield could use a a relief/ bead design on the metal to stiffen the lower and side panels. There is a bit of flex o that side.

Customer Reviews

Based on 555 reviews
88%
(489)
12%
(65)
0%
(0)
0%
(0)
0%
(1)
E
Earle Davis
Seems solid , ez to install

After watching a YouTube video was very easy to install my cat shield. Hopefully it will keep my converters safe from thieves.

M
Miles Hayes
Had to use a red sharpie to make it look like I busted my knuckles.

I purchased the aluminum version for my 2017 Tacoma 2-wheel drive.
Installation was pretty easy and took me about two hours, working by myself in my garage. The unit came with security bolts, two security bits, a tube of thread lock, and a small installation booklet. The only thing I had to remove beforehand was a couple of diagonal braces, which was indicated in the installation booklet. The braces then go back into place when mounting the cover. All the included security screws and brackets fit as designed, and drilling additional holes was not necessary. The mounting instructions are pretty simple, only three pages, and also provide torque specs. (Be careful not to over-tighten.) I raised up my truck using ramps and jack stands, and I used a 5-gallon bucket to set the cover on while I lined up the holes. It all worked and fit well and is a pretty good design. No cramming or jamming was needed. The unit isn't foolproof, but hopefully provides enough of a deterrent that a cat thief moves on. Money well spent for me and priced reasonably. And no bloody knuckles, thanks MillerCat. :-)

T
Tacoma Fan
3rd gen Tacoma millercat shield

Came promptly and properly packaged in excellent condition! Assembly and install about an hour with no problems. Used a floor jack to position (12ga model) Looks great and a great theft deterrent! Highly recommend it!

R
Robert B
Tacoma TRD Sport

Excellent delivery. Perfect fit. It took the local muffler shop less than 30 minutes to install.

s
sal valente
safe cats

The usual slight struggle to get installed. Driver side of the shield could use a a relief/ bead design on the metal to stiffen the lower and side panels. There is a bit of flex o that side.

Related Products