Tacoma 3.5L 4x4 2016-2023
Tacoma 3.5L 4x4 2016-2023
Tacoma 3.5L 4x4 2016-2023
Tacoma 3.5L 4x4 2016-2023
Tacoma 3.5L 4x4 2016-2023
Tacoma 3.5L 4x4 2016-2023
Tacoma 3.5L 4x4 2016-2023
Tacoma 3.5L 4x4 2016-2023

Toyota Tacoma 3.5L 4WD 2016-2023 Cat Shield

  • Complete bolt-on installation, no drilling required
  • Designed and manufactured in the USA to fit your specific vehicle
  • Part of Toyota’s Associated Accessory Product line
  • Secured with patented security screws with unique keys for unmatched protection against catalytic converter theft
  • PTN59-35211
SKU: TOY-044
$180.00
$220.00
$180.00
Material: Aluminum
Drivetrain: 4WD
Tacoma 3.5L 4x4 2016-2023

Toyota Tacoma 3.5L 4WD 2016-2023 Cat Shield

$220.00 $180.00

Toyota Tacoma 3.5L 4WD 2016-2023 Cat Shield

$390.00
Material: Aluminum
Drivetrain: 4WD

Customer Reviews

Based on 423 reviews
89%
(378)
10%
(42)
0%
(2)
0%
(1)
0%
(0)
S
Steven King
Cat shield

Arrived on time. Nice looking, easy pre- assembly. Mounting instructions were easy to understand and installation took me about 45 minutes on my 2020 Tacoma 4x4 off-road. I used my race floor jack with a towel on it, to keep from scratching it. I would recommend leaving the drivers side off until you install the 3 crossmember bolts. That way you have access. Putting that drivers side back ounce everything is loose made it much easier. Love the tamper proof bolts. Perfect fit. Great pricing as well.

G
Gary Odom

Installed easy no problem

A
Anonymous
Great Product and Packaging

Everything was packaged nicely and protected. Even the stickers on the box were perfectly aligned! The shield was easy to install on my 2022 Tacoma TRD offroad. It took a little more than an hour to get it installed by myself and was not difficult. The finish of the shield is very good, and the cuts and bends are top notch. I bought the aluminum version which kept it light weight, but I would have liked it to be a little thicker to make it a bit stronger. I really recommend this product because these cats on Tacoma's are so easy to get to by crawling underneath with a sawzall.

C
Curtis Palmer
Great quality, and fits well.

I am very pleased with the shield. Fit and finish are great! Hopefully it will never be needed but its cheap insurance. My only complaint is the way you have to start the three font screws through the crossmember to the threaded plate on top of the crossmember.

D
Dane Swanson
Confusing Order Options

I ordered what I thought would fit my 2018 Taco TRD off-road 4x4. I couldn’t actually find the selection on the order page that showed 4x4 with the above trim. The closest thing to four-wheel-drive was “RWD” which I assumed simply meant rear wheel drive 🤷🏼‍♂️
So assuming I had the right cat, I took it out of the box and started placing it, just to find out that it was for a 2WD. I didn’t want to re-order and have to wait, so I broke out the hand-grinder, and made it work. And then realized that one of the nut driver bits was the incorrect one, so I had to wait for them to send me the correct one. The whole thing could’ve gone smoother, but the order page was just simply confusing. Other than all that, the stainless steel shield is quite sturdy and a good quality design.

Customer Reviews

Based on 423 reviews
89%
(378)
10%
(42)
0%
(2)
0%
(1)
0%
(0)
S
Steven King
Cat shield

Arrived on time. Nice looking, easy pre- assembly. Mounting instructions were easy to understand and installation took me about 45 minutes on my 2020 Tacoma 4x4 off-road. I used my race floor jack with a towel on it, to keep from scratching it. I would recommend leaving the drivers side off until you install the 3 crossmember bolts. That way you have access. Putting that drivers side back ounce everything is loose made it much easier. Love the tamper proof bolts. Perfect fit. Great pricing as well.

G
Gary Odom

Installed easy no problem

A
Anonymous
Great Product and Packaging

Everything was packaged nicely and protected. Even the stickers on the box were perfectly aligned! The shield was easy to install on my 2022 Tacoma TRD offroad. It took a little more than an hour to get it installed by myself and was not difficult. The finish of the shield is very good, and the cuts and bends are top notch. I bought the aluminum version which kept it light weight, but I would have liked it to be a little thicker to make it a bit stronger. I really recommend this product because these cats on Tacoma's are so easy to get to by crawling underneath with a sawzall.

C
Curtis Palmer
Great quality, and fits well.

I am very pleased with the shield. Fit and finish are great! Hopefully it will never be needed but its cheap insurance. My only complaint is the way you have to start the three font screws through the crossmember to the threaded plate on top of the crossmember.

D
Dane Swanson
Confusing Order Options

I ordered what I thought would fit my 2018 Taco TRD off-road 4x4. I couldn’t actually find the selection on the order page that showed 4x4 with the above trim. The closest thing to four-wheel-drive was “RWD” which I assumed simply meant rear wheel drive 🤷🏼‍♂️
So assuming I had the right cat, I took it out of the box and started placing it, just to find out that it was for a 2WD. I didn’t want to re-order and have to wait, so I broke out the hand-grinder, and made it work. And then realized that one of the nut driver bits was the incorrect one, so I had to wait for them to send me the correct one. The whole thing could’ve gone smoother, but the order page was just simply confusing. Other than all that, the stainless steel shield is quite sturdy and a good quality design.