Happy Thanksgiving! Our office will be closed and all products will ship on DEC 2nd
The discontinued, older model of this shield is available on our Cat Shield Outlet for a discounted price.
Material: Premium Grade 5052 Aluminum, .125"
Notes: Shield may have some surface imperfections. Professional installation recommended. Will not work with Lift Kits that modify the sway bar mounting bracket. Package includes catalytic converter shield, tamper-proof hardware kit, Cat Shield Protected sticker, and detailed installation guide. Order today to protect your vehicle from catalytic converter theft.
Our Fitment Guarantee: While we do our best to test and verify every model, it is impossible to know for sure. We guarantee that if your vehicle is listed on the fitment table and you purchased the right shield for your vehicle but the shield does not fit, we will issue a full refund including return shipping on the product. The vehicle must have the original converter and no modifications to the suspension. If you are unsure about your fitment, please send photos to support@millercat.com to verify fitment before purchase.
Year | Make | Model | Engine Size | Drivetrain | Notes |
---|---|---|---|---|---|
2021 | Ford | F‑150 | 2.7L/3.3L/3.5L/5.0L | RWD/4WD | Compatible with FX4 Offroad models, Not tested on 3.0L engine sizes, Will not fit PowerBoost (Hybrid) models |
2022 | Ford | F‑150 | 2.7L/3.3L/3.5L/5.0L | RWD/4WD | Compatible with FX4 Offroad models, Not tested on 3.0L engine sizes, Will not fit PowerBoost (Hybrid) models |
2023 | Ford | F‑150 | 2.7L/3.3L/3.5L/5.0L | RWD/4WD | Compatible with FX4 Offroad models, Not tested on 3.0L engine sizes, Will not fit PowerBoost (Hybrid) models |
2024 | Ford | F‑150 | 2.7L/3.3L/3.5L/5.0L | RWD/4WD | Compatible with FX4 Offroad models, Not tested on 3.0L engine sizes, Will not fit PowerBoost (Hybrid) models |
Disclaimer: Our product was designed to be used under normal operating conditions set by the manufacturer. Exceeding those conditions may risk damage to the vehicle or the product. See Section 28 in our Terms of Service for more information.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, visit P65Warnings.ca.gov.
Will the shield interfere with maintenance such as engine oil and transmission fluid changes?
All Miller CAT Cat Shields will not interfere with your oil changes. Some vehicles will require the shield to be removed for transmission fluid changes. Check your maintenance schedule on how frequently to change your transmission fluid.
Does this shield cause the converter to overheat?
No, our shields will not cause overheating or damage to your vehicle. In addition to shields, we manufacture catalytic converters, so we know how to protect them without damaging the converter or your vehicle. Read about this in more detail.
How long does it take to ship?
We know you can’t wait long to protect your converters when theft is so rampant. Here at Miller CAT, our shields are made to stock and ready to ship. Unlike many other companies that make shields to order, we fulfill orders in 1-2 business days and if possible, on the same day.
Free Shipping Info
Free shipping is available to the lower 48 States. Please note that we cannot deliver to P.O. Boxes. Orders will take 1-2 business days to fulfill.
Expedited Shipping Info
Expedited shipping is available for customers who need their products sooner. Please note the following when choosing an expedited shipping method:
International Purchases
Miller CAT will collect the estimated duties and taxes and pay it on behalf of the customer. The final price you see should be the final price you pay.
Returns
We have a 30-day return policy window for unused products. Please visit this
link for more information.
Note: We ask that you carefully review vehicle compatibility and other product/install information before making your purchase. Help us reduce the possibility of returns as much as possible and reduce the carbon footprint of these shields, as they are large and expensive to ship.
We have a 90-day manufacturer's warranty against defects from the manufacturing process. This covers issues that prevent the proper installation or performance of the product.
Cosmetic imperfections that occur either from the manufacturing or shipping process are not covered. We do not manufacture cosmetic products or ones designed for show. Any undercar product will quickly gain scratches and scuffs due to the location of the product and proximity to the road. Click here to find out more about the manufacturing process and what you might expect from your product.
We do NOT guarantee our product against theft. Cat Shields are a deterrence device that are meant to discourage theft and/or make it more difficult for thieves to steal your converter. Given the right tools, technique or time, a thief can still take your converter. However, by having a shield, you are significantly increasing your protection against converter theft. Similar to a car or home alarm, you are making thieves second-guess themselves and consider moving onto another target. Deterrence works and we have countless customer accounts and video evidence of derailed converter theft.
Great material (stainless), but why couldn't it have been made in one piece?
The installation was straight forward but there was difficulty to fit with the 2024 F150 back shield behind the transmission circumber as it overlaps with back driver side fitment of your CAT shield and also the L shape brackets could be made continuous metal rather than a gap in the middle which could be a weak point.
The shield will serve as a good, symbolic barrier against all but the most determined thieves. It would be better if it were made from steel. Yes, I know they had that option for an additional charge, which doesn't make sense since aluminum is more expensive that steel.
The installation was easy and straight forward, but be careful with the extremely sharp edges of the aluminum shield. They should invest a few dollars in deburring the edges.
Lastly, their shipping was fast and it was well packed.
For a 2023 F150 4x4. I had it installed by a local muffler shop, although the instructions were very well written. Took them about 45 minutes. All parts included.
I purchased the stainless steel version and installed it myself. I followed the instructions and completed installation in a short amount of time in my garage. Everything fit perfectly on my 2023 F150 FX4. For access to work under the truck, I raised it 3 inches by driving the front tires up onto a couple of 2" x 10" boards.
Great material (stainless), but why couldn't it have been made in one piece?
The installation was straight forward but there was difficulty to fit with the 2024 F150 back shield behind the transmission circumber as it overlaps with back driver side fitment of your CAT shield and also the L shape brackets could be made continuous metal rather than a gap in the middle which could be a weak point.
The shield will serve as a good, symbolic barrier against all but the most determined thieves. It would be better if it were made from steel. Yes, I know they had that option for an additional charge, which doesn't make sense since aluminum is more expensive that steel.
The installation was easy and straight forward, but be careful with the extremely sharp edges of the aluminum shield. They should invest a few dollars in deburring the edges.
Lastly, their shipping was fast and it was well packed.
For a 2023 F150 4x4. I had it installed by a local muffler shop, although the instructions were very well written. Took them about 45 minutes. All parts included.
I purchased the stainless steel version and installed it myself. I followed the instructions and completed installation in a short amount of time in my garage. Everything fit perfectly on my 2023 F150 FX4. For access to work under the truck, I raised it 3 inches by driving the front tires up onto a couple of 2" x 10" boards.
Great material (stainless), but why couldn't it have been made in one piece?
The installation was straight forward but there was difficulty to fit with the 2024 F150 back shield behind the transmission circumber as it overlaps with back driver side fitment of your CAT shield and also the L shape brackets could be made continuous metal rather than a gap in the middle which could be a weak point.
The shield will serve as a good, symbolic barrier against all but the most determined thieves. It would be better if it were made from steel. Yes, I know they had that option for an additional charge, which doesn't make sense since aluminum is more expensive that steel.
The installation was easy and straight forward, but be careful with the extremely sharp edges of the aluminum shield. They should invest a few dollars in deburring the edges.
Lastly, their shipping was fast and it was well packed.
For a 2023 F150 4x4. I had it installed by a local muffler shop, although the instructions were very well written. Took them about 45 minutes. All parts included.
I purchased the stainless steel version and installed it myself. I followed the instructions and completed installation in a short amount of time in my garage. Everything fit perfectly on my 2023 F150 FX4. For access to work under the truck, I raised it 3 inches by driving the front tires up onto a couple of 2" x 10" boards.
Thanks for subscribing!
This email has been registered!